The XPT is a Wall Mounted X10 Controller / Transmitter. The XPT Base Unit utilizes 7 different multi-button Keypads to send X10 Commands (over existing power wires) to include: ON / OFF / Brighten / Dim / All Lights ON / All Units OFF. The XPT is mounted into a standard single-gang wall box and the Keypads are plugged onto the face of the base unit. The XPT Base Unit is wired to HOT and Neutral. The XPT with any of 7 Keypads can control any X10 Receiver Modules. Unit Number Addresses run in Sequential Order ascending up from the set Number Dial Address.

I.E. - Dials set to A1, next button is A2, A3 and A4 in accordance with the Keypad used. Individual Keypads come in White or Ivory.

The XPT requirs a Hot and Neutral wire only. The XPT sends commands to X10 recievers.

Keypads:   ( simply click on the item name to be taken to it)

White Versions:
    * XP1 1 button, 1 Address, ON / OFF
    * XP1A 1 button, 1 Address, All Lights ON, All Units OFF
    * XP2 2 button, 2 Address, ON / OFF
    * XP2D 2 button, 1 Address, ON / OFF, Brighten / Dim
    * XP4 4 button, 4 Address, ON / OFF
    * XP4D 4 button, 3 Address, ON / OFF, Brighten / Dim
    * XP4A 4 button, 3 Address, ON / OFF, All Lights ON / All Units OFF

Ivory Versions:
    * XP1 1 button, 1 Address, ON / OFF IVORY
    * XP1A 1 button, 1 Address, All Lights ON, All Units OFF IVORY
    * XP2 2 button, 2 Address, ON / OFF IVORY
    * XP2D 2 button, 1 Address, ON / OFF, Brighten / Dim IVORY
    * XP4 4 button, 4 Address, ON / OFF IVORY
    * XP4D 4 button, 3 Address, ON / OFF, Brighten / Dim IVORY
    * XP4A 4 button, 3 Address, ON / OFF, All Lights ON / All Units OFF