XPDI3 X10 Pro Inductive Dimmer Wall Switch Module replaces your standard wall switch for complete local and remote X10 control of lighting and fan speed and allows you to integrate your fans and low voltage incandescent fixtures into your home X10 system. It can be paired with your current switch plate or one available at any local hardware or big box store.  The XPDI3 Pro Switch can be used in 3-way and 4-way applications with the addition of one or more XPSS X10 Pro Companion Switches.

Lights, ceiling fans, and other motor-controlled devices may be controlled locally by any member of your household, and can be adjusted in up to 16 steps with this simple and accessible X10 wall switch. But with an X10 remote, like the HR12A PalmPad Remote Control, you can do all that remotely and more. The XPDI3 Pro Switch responds to the All Lights On, All Units Off, Dimming, and Brightening commands via X10 wireless remotes and plug-in controllers, like the X10 SC503 Maxi Controller. XPDI3 X10 Pro Inductive Dimmer Wall Switch Module can round out any X10 system nicely, bringing easy, professional home automation to the wired lights and fans you use daily.

Dim the lights in your living room for a home theater experience with the HR12A PalmPad Remote Control.  Control fans without fuss on hot, stuffy days with the KR22A CreditCard Remote. And adjust outdoor fixtures, like incandescent porch lights and fans, with the KR19A Keychain Remote.

This switch may be used in single pole applications, simply cap off the red traveler wire. Please consider that lamps rated below 40W may flicker or operate erratically with this switch and should not be used. A power cut off is located directly below the switch for safe and easy bulb changes.

X10 Product No.:	XPDI3-IW
Whats Included:	(1) X10 PRO Dimmer, (1) Set White & Ivory Rocker Switches
X10 Power Rating:	120 VAC, 500W, 5A
Color:	Ivory / White
Downloads:	Product Manual

Neutral wire required for inductive dimming

Compatible with X10 Pro Companion (slave) Wall Switch for 3 and 4-way circuits (XPSS)

Special Note: If your incandescent or halogen lights aren't working and dimming properly with two-wire dimmer switches, this three-wire switch will usually solve the problem. If you're planning on using this switch with electronic low-voltage transformers, we suggest you also use a in-line noise block to eliminate the noise usually generated with this combination. Magnetic transformer loads usually do not generate noise, but may generate hum with some fans or motor loads. Unfortunately, there is no way to determine whether hum will occur without actually trying it. But, if unacceptable hum occurs, use the XPS3 wall switch module to provide X10 ON/OFF control only.

Not for use with fluorescent lights.

* Inductive Dimmer module for ceiling fans and 4A motors.

* Automate low-voltage lighting, fans & transformer loads

* Inductive dimmer for resistive or inductive lighting

* Works with low voltage (transformer) lighting

* One Year Warranty included

* We get our products direct from X10 so you are assured great quality.