Control
your recessed and out-of-the-way home fixtures, whether they give your
home
stylish environmental lighting, or illuminate important areas and work
spaces.
With the XPDF X10 Pro Inline Dimmable Receiver Module and your X10 home
automation
system, even ambiance lighting and canned fixtures can respond to the
On/Off,
All Lights On, Dim, Brighten, and All Units Off commands.
These are
the newest version XPDF that have the new Soft Start feature. When you
turn the
lights ON remotely, they gradually fade up to full bright in about 2
seconds. When
you turn them OFF, they gradually fade to OFF in about 3 seconds. These
work
identically to the new Soft Start lamp modules. If you dim them all the
way
down, they stop at about 10 percent brightness.
Softly and discretely light any room by remote control and set just the
mood
you're looking for with a controller you can keep in your pocket. This
small
module receives signals from your X10 system through your existing home
wiring,
via plug-in controllers and radio frequency signals from wireless X10
remotes,
like the HR12A X10 PalmPad Wireless Remote
Control Module. Enjoy the
ability to
shut off all your house lights with a handy PHC02 X10 Pro Plug-in Mini
Controller in the bedroom or
kitchen, and avoid the hassle of locating every
light switch at bedtime. Avoid stubbed toes and save on your energy
bills!
No more fumbling, just instant lighting when you need it. There's no
need to
come home and stumble around a dark house with your hands full, in
search of a
light switch. Switch on your house lights before you're even in the
door with
the PHR04 X10 Pro Wireless Keychain
Remote.
With modules that function with a variety of motion sensors and timers,
like
the XTMP4 X10 Pro LCD 64-Event Mini
Timer the X10 system gives you
an easy
modern means of controlling all your home lights and appliances. Give
your
house the appearance of someone at home even when your away with X10
timed
programing.
Other types of lighting can be include with your X10 system with
appliance
modules, like the PAM01 X10 Pro Appliance Module.
Designed for loads up to 300
Watts, the XPDF X10 Pro Inline Dimmable Receiver Module works only with
incandescent bulbs, if you need a device like this one that works with
noin dimming devices like flourescent bulbs you can use the XPFM.
| X10 Product No.: | XPDF | ||||
| Whats Included: | (1) X10 Pro Inline Dimmable Receiver Module (XPDF) | ||||
| Load Range: | Max 300W | ||||
| Compatible Load Type: | Incandescent only | ||||
| Mounting Location: | Iinside a light fixture or electrical box | ||||
| Downloads: |
|
Note: Do not use to control Receptacles, Fluorescent Lighting, Motors or Transformers. Only for use in fixtures where 60 Degree C. wiring is permitted. Maximum ambient operating temperature: 140 Degrees F. (60 Degrees C.) The XPDF responds to ON/OFF, BRIGHTEN/DIM, and ALL LIGHTS ON/ALL UNITS OFF.
* Compact Form Factor: Fits inside recessed lighting cans and single gang boxes of new or existing loads
* Allows hard wired control from inside the fixture
* Controlls incandescent loads of up to 300W.
* One Year Warranty
* We get our products direct from X10 so you are assured great quality