Motion Detection

Mount the tiny, weatherproof Motion Sensor wherever your guests arrive - driveway, by the mailbox, front porch, etc. As soon as someone approaches within 20 feet of the sensor, your alert will go off. The sensor works both day and night in any weather condition! Plus, it's completely wireless and runs on just a couple batteries!

Audio Alert

Plug the Sensor Chime into any outlet in your house. It will let you know you have guests with a pleasant chime. You can unplug it an plug it in in any room at any time. If you're doing laundry in the basement or working out in the shop, just bring it with you and plug it in there for an anywhere alert!

Lighting Alert

The Transceiver doubles as a lamp/appliance module, so you can plug any lamp into it and set the lamp to come on when motion is detected. Plug a living room, hallway or bedroom lamp into the Transceiver, and you will get a lighting alert in addition to the chime.

Easy, Plug-n-Play Setup

It couldn't be easier to set up. It's all wireless and it's all plug-n-play, ready to go out of the box! It won't take you more than 5 minutes!

Easy to Expand

Everything in this complete kit is designed to work with all X10 home automation products. Add more sensors, chimes or even more lighting control. It's all X10 compatible!

Warranty: 1 year

Step A: Install motion sensor onto almost any surface, indoors or out, with just 2 screws!	Step B: Set the same house & unit code for the remote chime that you wish to be motion-activated.
Step C: Set the house & unit code for your EagleEye Motion Sensor.	Step D: Enjoy the convenience & safety of instant notification when someone is in your driveway!

X10 Product No.:	MS14A
Whats Included:	(1) X10 Powerhouse Long Range Wireless Motion Detector
Range:	40 ft. range in a 90° arc
Power Supply:	4 AA batteries (sold separately)
Downloads:	Product Manual

X10 Product No.:	SC546
Whats Included:	(1) X10 POWERHOUSE Remote Chime
Power Supply:	Plugs into any standard 110V AC wall outlet
Downloads:	Product  Manual

NOTE: Module does not respond to OFF or ALL LIGHTS ON

X10 Product No.:	TM751
Whats Included:	(1) X10 Transceiver Module
Expansion:	Unlimited
Compatibility:	Works with X10's line of IR/RF remote controls and PIR motion sensors; rated for 500W incandescent bulbs
Resistive Load:	15 amps
Motor Load:	1/3 HP
Downloads:	Product Manual

Be careful to have only one RF base unit or X10 security console (which also change RF signals into X10 signals for the electricity line) per housecode. If more than one base unit is used on the same housecode, X10 signal collisions may result.

* Be instantly alerted when you have visitors, deliveries or unwanted guests

* Install it yourself in a matter of minutes - no wiring required!

* Set the Remote Chime anywhere in your home for instant alert

* Motion turns on lamp and rings chime

* Mount battery-powered Motion Sensor anywhere on your property up to 100 feet away (from Transceiver)