Gone are the days of running around your house from plug to plug to turn off your Christmas lights and decorations. Stop worrying about whether you did or didn't forget to turn the lights off on the Christmas tree and possibly create a fire hazard. Stop breaking your back bending over to turn your Christmas tree lights off every day.

Now you can affordably run all of your Christmas lights and decorations on a timer and never have to touch them until after the holiday seasons.

The X10 Christmas Kit was designed to save electricity, prevent fire hazards, and give you more time to relax during the holidays.

X10 Computer Kit w/ Software
The Computer Kit is the heart of this system. It comes with a CM19A USB Sender that plugs into your computers USB port. It also comes with a transceiver that is plugged into an outlet that receives the signals from your computer and sends them to the X10 appliance modules. The software is fantastic. You can set up scheduled events and timers, turn lights on and off from your computer and even turn lights on and off over the internet and even from a smartphone with additional add-on software. The possibilities are limitless.

Transceiver
The powerful Transceiver Module is the relay for the KR22A Keychain Remotes and the HR12A Hand Held Remote. It allows you to remotely control your Christmas lights and decorations that are plugged into the Appliance Modules. Simply plug the Transceiver into any normal wall socket and, using the KR22A and HR12A, control your lights and decorations from across the room — or the other side of the house. This transceiver also has a passthrough receptacle!

Appliance Module
Automate or remotely control Christmas lights and decorations from across the room or from the other side of your house. Also works with fans, air-conditioners, dehumidifiers, coffee pots, stereos, TV's and more! Just plug your Christmas lights and decorations into the appliance module, and plug the appliance module into any normal wall socket. Control with any X10 Controller, in conjunction with Transceiver Module. Rated at 15 amps, 1/3 hp, 500 watts.

CM19A

X10 Product No.:	CM19A
Whats Included:	(1) X10 USB PC Transceiver
Requirements:	PC running Windows ® 95 OSR 2.1 with USB support, or Windows 98 - Windows 7
Power requirements:	5V DC (USB bus powered)
Downloads:	Product Manual

IMPORTANT: DO NOT plug the CM19A into your PC until you install the X10
software.

TM751

Be careful to have only one RF base unit or X10 security console (which also change RF signals into X10 signals for the electricity line) per housecode. If more than one base unit is used on the same housecode, X10 signal collisions may result.

X10 Product No.:	AM486
Whats Included:	(4) X10 Appliance Module 2-Pin (AM486)
Power Rating	Rated at 15 amps, 1/3 hp, 500 watts
Controllable Devices:	Fluorescent Lights, Air conditioners, Hot tubs, Computers, Coffeemakers, Radios, Electric blankets, Hot water heaters, Battery chargers, Fountains and pool pumps, Vacuum cleaners
Downloads:	Product Manual

Note: These modules are identical to 3-pin X10 appliance modules, but with a 2-pin socket. Each X10 module is given its own address by selecting a letter (house code) and number (unit code) on the 2 dials. Rated for 15 amps, or 1/3 Hp.