Video Surveillance System 

With Two Cameras

Pan & Tilt Robotic Mount 

Motion Activated PC-DVR Recording

It has all the features you will ever need in a security camera system and it's easy to expand with more cameras or other X10 gear as needed!

One Year Warranty Included

Features:

Get online from anywhere in the world and view all four cameras LIVE

Watch over your home and control your cameras right on your PC

No contractors needed for setup

Software will email your phone snapshots when motion is detected at home

Set your system in home mode and hear a chime any time someone approaches your home

Set it up yourself in less than 30 minutes

Motion-Activated PC recording ensures all the evidence is recorded

Watch over your home 24 hours a day with Daylight/Low-Light Security Cameras

Remotely maneuver a camera left, right, up and down with Pan & Tilt Base

Cameras and Motion Sensors are weather-resistant - set them up indoors or out

What's included:

1 Wireless PC Transceiver (CM19A)

1 PAN AND TILT Remote Controls (CR14A)

2 EagleEye Motion Sensor (MS14A)

1 Vanguard Control Center Software (SW26A)

1 Small Wireless Transceiver (TM751)

1 USB Video Capture Adapter (VA12A)

1 Pan & Tilt Base (VK74A)

1 Color Wireless Video Camera (XX16A)

1 Small Video Receiver (no audio) (VR36A)

1 NightWatch Wireless Low-Light B/W Video Camera (XX20A)

Camera sends wireless signals to the receiver. Cameras and pan/tilt base units do require an AC outlet for power (14ft long power adapters are included). Optional camera battery packs are available for 100% wireless operation. After payment is received we will email you the vanguard software. If you do not receive the email within 48 hours please call us at 888-423-8972 as the email most likely was caught in a spam filter.

You get TWO Mini, Wireless Security Cameras  that can be set up indoors or out. A Full Color Camera and a Low-Light/Daylight Cameras that work 24 hours a day (cameras are not IR so they do require some light to operate). They tirelessly transmit video right to your TV or PC.

We're also including a Robotic Pan & Tilt Base unit with Remote. Use it with any of the four cameras and remotely sweep it left, right, up and down. Increase any camera's viewing range X4! Set up to four preset positions - just hit a button on the remote and the camera will move to that preset! Plus, you can even set it on auto-pilot, so it will automatically sweep through all preset positions. Now you'll be able to use one camera to watch over your entire porch, side yard and driveway!

And we know that you can't constantly be home to watch your cameras. DON'T WORRY! Even if you're out of town, at work or just out and about, you can rest easy knowing your surveillance system is doing it's job. With Motion-Activated PC Recording, any time someone sets foot on your property, their every action will be captured on your computer's hard drive!

And we can't forget the PC/Web Software - our PREMIER Vanguard Internet Control Software to be exact! Watch and control from your home PC or via the Internet from anywhere in the world. You can even control the Pan & Tilt Base with a click of your mouse! Again, everything you need is included!

In a nutshell, here is how it works:  The cameras send the video signal wirelessly, up to 100 feet and those signals are received by the included wireless receiver.  The wireless receiver will process the cameras signal and send that video to your computer via the included USB adapter.  Once the software is installed on your computer you can then view the footage from the cameras, change which camera is being viewed and even record the footage straight to your computers hard drive!  If you have a high speed internet connection at that computer, you can even log in remotely, while you are away from your home, and view the cameras live.

If you plan to just view the system directly on your television (without the computer recording option), the system gets even simpler.  Simply run the included video cable from the wireless receiver to your TV’s video input, use the wireless remote to switch between cameras and you are done! 

How about doing BOTH?   This system is so flexible, with only one additional wireless video receiver you can run this to both a computer and a television set!

Here's the beauty of this complete system: If you're up working in your home office, catch all the action on your PC. If you're away, you can get online from any computer in the world, enter your password and view all four of your cameras LIVE! Even cooler, your spouse or kids can get on from another location - multiple people can view your secure feed as long as they've got your password! It's perfect for when you're at the office or out of town! Plus, you can even set it up to email you snapshots any time motion is detected around your home so you will always know what's going on at home! It can even email your cell phone snapshots so you can check up on your home from absolutely ANYWHERE!

Recently, another happy X10 customer called X10 to thank them for the camera which caught burglars in the act and resulted in their arrests. It's quite the story. Read it below, and check out the video!

Get to know your camera system...

Cameras do require a power supply which is included.

Cameras do require a power supply which is included.

View Your Security Cameras from Anywhere in the World with the Vanguard Internet Control Center Software 

Turn 100 feet into 100 miles and more. Now, instead of seeing LIVE video from your security camera network at up to 100 feet away, you can watch the action from anywhere in the world! Just like being there, you'll see full-motion video from your home or business anytime you want.

Your Internet Control Center Software works great with any connection speed - T1, Cable, DSL, and even dial-up! You can even adjust picture quality and frame rate for the best experience. And, as you would expect, you can enter a password for completely secure access.

Finally, your Internet connection is about to really pay off!

"I went on a vacation to Tahiti, and was able to check up on my home with a couple clicks of my mouse! The Vanguard Software is truly amazing!"

-Judy S.

Davis, CA

Plus, moving your Pan & Tilt Base to a preset position is easy with the Preset Control Bar. All of your positions are represented with a thumbnail image. One click on the image of your choice sets camera into action. Watch as it pans and tilts to the next location. Plus, setting new preset is now as easy as clicking in any open slot.

When you want to explore at will, the pan & tilt buttons are readily available to give you precise control of your location. You can pan and tilt your camera base by simply clicking your new location directly on the video. It Doesn't Get Any Easier Than This!

With Vanguard Internet Control Center Software, you can easily switch between as many as eight cameras and see multiple views all at the same time. The active video window shows LIVE video while all others display a snapshot of the most recent image at that location.

Change your active window with just one click! Or, set an amount of time to scan between your security cameras and then sit back and watch as everything works on autopilot.

This is the complete multi-camera monitoring solution you've been waiting for! All you need is a Windows-based PC and you're ready to go!

Receiver does require a power supply which is included.

Pan& Tilt base unit does require a power supply which is included. Camera gets its power from the base so only one AC outlet is required to run camera and base.

Control your Pan & Tilt Bases with the included Remote!

Motion sensors are battery operated.

Transceiver does require a power outlet.