NOTE: This is the last inventory of the TM751 with the built in appliance module. With this unit you can control the two prong plug in at the bottom of the TM751 with X10. These units do come in aftermarket packaging direct from the manufacturer. Once they are gone, they are gone!
If you would like to view the updated TM751 transceiver, you can find that unit HERE. This newer unit simply omitted the appliance module function and the plug in is now simply a pass through.
control of the lights and devices in your home or business is simple
convenient with the TM751 X10 Plug-in Transceiver Module at the heart
system. The TM751 Transceiver picks up radio frequency signals from X10
remotes, like the HR12A
PalmPad or a KR19A
Keychain, and sends the signals
your existing home wiring to all connected modules
As the base of an expandable system that allows you to customize the lighting and appliances throughout your home, the TM751 X10 Plug-in Transceiver Module enables you to use your X10 wireless remote control from any room. The TM751 sends out signals along the electrical wiring in you home to the modules (like the AM466 and AM486 Appliance Modules) that connect to your lights and appliances. And, it features its own built-in appliance module which functions in a way similar to the AM486 Appliance module.
Welcome yourself home with well lit rooms and your favorite radio station before you're even in the door. Entertain instantly with dimmed lighting, fans, decorative lamps, and environmental elements switching on without your having to neglect your guests. And, tuck the whole house in at night with the convenience of your MC10A Mini Plug-In Controller or X10 wireless remote control, and without having to get cold feet getting out of bed.
The way you interact with you home will change with the X10 modules you control with the TM751 Transceiver. There are a number of X10 control units available, and there's sure to be one that works for you. As a system they control your environment with the modern ease you're seeking.
Attempts to use more than one TM751 Transceiver on the same wiring may occasionally cause signal collisions which may "lock up" your transceiver. Though, most home systems run easily off a single transceiver. In the event of a lock up, simply unplug your transceiver and plug it back in.
|X10 Product No.:||TM751|
|Whats Included:||(1) X10 Transceiver Module|
|Compatibility:||Works with X10's line of IR/RF remote controls and PIR motion sensors; rated for 500W incandescent bulbs|
|Motor Load:||1/3 HP|
Be careful to have only one RF base unit or X10 security console (which also change RF signals into X10 signals for the electricity line) per housecode. If more than one base unit is used on the same housecode, X10 signal collisions may result.
* Receives RF signals from up to 16 individual transmitters
* Works with most X10 Home Automation RF devices
* Easy Setup in Minutes
* No Additional Wiring Required
* One-Year Warranty included
* We get our products direct from X10 so you are assured great quality