Protect Your X10 System from Unwanted Signal Interference

Increase the stability and reliability of your X10 installation by blocking out stray X10 signals from outside your home

The X10 PRO 3-phase 250A Signal Blocking Coupler is designed to sense and cancel out X10 signals from crossing from one household to another via the AC wiring.

The coupler/blocker is installed outside the home between the meter and the breaker panel, on the Copper Neutral wire to sense and neutralize any X10 signals in the power feed before entering the house.

Unique features of the design include its ability to efficiently couple X10 signals between phases, the elimination of any direct connections to the power company-side wiring and the elimination of heavy current carrying inductors, resulting in a very compact design.

The unit may be used in single, dual or three phase installations.

For best results a PZZ01 should be installed at both homes experiencing the signal crossings.

X10 Product No.:	PZZ01
Whats Included:	(1) X10 PRO Passive Blocking Filter
Attenuation Rate:	30:1
Dimensions:	2 7/8 X 3 1/4 X 2 1/8 inches
Downloads:	Product Manual

Note: Installation must be carried out by qualified electricians only. The main breaker must be turned off during installation and the flter must be installed in a suitable workbox or equivalent enclosure. Check local Electrical Codes in your area for any additional installation requirements. A jumper on the PZZ01 is needed from L3 to L2 when installing into a split-phase panel.

* Blocks X10 signals from entering the home

* Couples X10 signals across 2 and 3 phase systems

* Small form-factor for easy installation

* Recommended for all X10 Pro installations

* One-Year Warranty included

* We get our products direct from X10 so you are assured great quality