Improve reliability with your home automation system.
Plug-in Coupler-Repeater is the world's first plug-in signal
coupler-repeater designed to increase the reliability of your system by
simply plugging into an existing dryer outlet!
The SignaLinc Plug-in Coupler-Repeater simply plugs into an existing
clothes dryer outlet. Unlike previous solutions, which typically
involve hiring an electrician to hardwire a signal bridge or installing
a capacitor inside the breaker box, the SignaLinc Plug-in
Coupler-Repeater can be installed just by plugging it in! It includes a
feed-through outlet for your existing dryer to use so you won't block
the outlet for your clothes dryer.
Why you Need SignaLinc Plug-in
most homes have 2-phase 220V power that splits into two separate 110V
legs, sometimes X10 signals have a hard time making the transition from
one leg to the other. Simply plug a SignaLinc Plug-in Coupler-Repeater
into your home's 220V electric dryer receptacles and it will detect and
amplify X10 signals between the two power lines in your home.
Better than the Passive Signal
this unit actively amplifies or re-generates the X10/PLC signals, your
receivers will get a stronger signal than what they would have received
directly from the originating transmitter via the non-amplified signal
bridge. Homes with large installation of X10 products will see an
immediate improvement in response. No longer will you have a module
stay on all night because the OFF signal was too weak to trigger the
The SignaLinc Plug-in
Coupler-Repeater includes four indicator LEDs on the front of the unit.
These indicators show the status SignaLinc's processing of the
powerline signal. The red and green pairs monitor each phase separately
and illuminate when X10 signals are detected and re-transmitted.
SignaLinc Plug-in Coupler-Repeater is available for 3-wire dryer
outlets. Once installed, it remains easily hidden behind the dryer.
Safety Tested and Factory
SignaLinc products are safety approved. The assembly line for Smarthome
Design Products is ISO9001 certified. In order to meet the ISO 9001
standards, the entire factory underwent rigorous inspections of
procedures and policies before being thoroughly audited. The
certification received was based on its dedication to high quality
management systems and strict adherence of quality systems and
x 4.31"H x 2.92"D (4.34"D with AC prongs)
installation, no electrician required - feed-through outlet for dryer's
X10 signals for greatly improved performance
indicate phase send/receive activity
not interfere with INSTEON signal performance