Essential Info

Having trouble getting X10 receivers in one area of your home to operate from X10 transmitters in another area of your home? Solve the problem in seconds with the SignaLinc™, the world's first Plug-In Phase Coupler!

Because most homes have 2-phase 220V power that splits into two separate 110V legs, sometimes X10 signals have a hard time making the transition from one leg to the other. But plug a SignaLinc™ into one of your home's 220V receptacles (like the one powering your electric dryer) and it will pass X10 signals between the two power lines in your home.

Unlike previous solutions, which could involve hiring an electrician to hardwire a signal bridge or jury-rigging a capacitor inside the breaker box, the SignaLinc™ can be installed just by plugging it in! Plus, with its built-in receptacle, you'll be able to do this without blocking other appliances from plugging into it.

Note: The SignaLinc™ is a passive coupler and does not amplify the signal. This means the signal coupled onto the receiving phase will be no stronger than the original signal on the transmitting phase. How well the SignaLinc™ works in your home is dependent on many factors, including signal strength for the transmission phase. For homes larger than 3,000 sq. ft., we recommend installing an amplified coupler repeater, such as the 4826a.

Note: For proper usage, double-check that the SignaLinc is properly plugged into the wall and the dryer is properly plugged into the SignaLinc. Failure to do so can cause a heat issue.

Safety Tested and Factory Certification
All SignaLinc products are safety approved. The assembly line for Smarthome Design Products is ISO9001 certified. In order to meet the ISO 9001 standards, the entire factory underwent rigorous inspections of procedures and policies before being thoroughly audited. The certification received was based on its dedication to high quality management systems and strict adherence of quality systems and guidelines

The SignaLinc for 3-wire dryers remain easily hidden behind the dryer (measures 3.13" wide, 4.31" high, 2.92" deep [4.34" deep with AC prongs]).

Specifications
Smarthome Product No.:	4816B2
Dimensions:	3.13" W x 4.31" H x 2.92" D (4.34" deep with AC prongs)
Warranty:	2 years

* Bridges X10 powerline signals

* Plugs right into a 220V outlet — no electrician required

* Built-in receptacle — you won't tie up the outlet

* Stays hidden behind your dryer