Home > Shop By Brand > INSTEON > Insteon Wire-in / Outlet Modules > 2473 OutletLinc Remote Control Outlet - White - INSTEON

2473 OutletLinc Remote Control Outlet - White - INSTEON
2473 OutletLinc Remote Control Outlet - White - INSTEON
2473 OutletLinc Remote Control Outlet - White - INSTEON2473 OutletLinc Remote Control Outlet - White - INSTEON
Item #INST-2473
Retail price:$45.99
Quantity
This item is currently out of stock!
Bookmark and Share

Control Your Plug-In Devices with the World's First INSTEON-Compatible Decora-Style Outlet

Do you have lamps and appliances you want to automate that are plugged into exposed outlets? If so, OutletLinc is a perfect fit; it gives you fast, reliable INSTEON control with the sleek look of a modern, decora-style outlet. Available in white, ivory , almond , and black .

Scene Lighting
Scenes allow you to control multiple lights, rooms or even the whole home with a single command. Because OutletLinc can be a member of more than 400 scenes (i.e. "Movie Time," "Party," "Romance," etc.), you'll be able to launch various lighting scenarios with a single button press on an INSTEON Controller . These are elegant features usually found only in systems costing tens of thousands of dollars and requiring extensive rewiring of your home. All member lights and appliances can turn on or off instantly, all controlled with one command from one button. If you want to control multiple scenes from one controller, try the INSTEON KeypadLinc Dimmer.

Convenient
For added convenience, OutletLinc's bottom outlet is always on. So, whether you need an outlet in the hallway for the vacuum, or an outlet behind the living room couch for an INSTEON tabletop controller , you'll never have to worry about the outlet being switched off. Also, if you ever need to switch the top outlet on manually, you can either use OutletLinc's built-in ON/OFF button (located between its two outlets) or turn your lamp or appliance on and off with its own ON/OFF switch (with load sensing enabled).

X10 Compatible
INSTEON OutletLinc is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. X10 ready means that the module can respond to X10 commands from an X10 controller. Please note that INSTEON devices repeat INSTEON signals but not X10.

Non-Volatile Memory
All ApplianceLinc settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, the OutletLinc will return the appliance to its last on/off state when power is restored.

Certifications and Warranty
All OutletLinc products are safety approved. The factory for SmartLabs Design Products is ISO9002 certified. Because of this passion for quality, Smarthome stands behind the entire SwitchLinc line of products with a full 2-year warranty.


Product Number 2473SWH, INSTEON OutletLinc, White
UPC: 689076-407748
Warranty 2 years
Whats Included INSTEON OutletLinc (White), 3 wire nuts, Quick Start Guide
Downloads:
     
  Quick Start Guide      

BUY IT NOW

Operation
Status LED: White
Local Control: Load Sensing (can be disabled)
Setup Memory: Non-volatile EEPROM
INSTEON Features
INSTEON Addresses: 1 hard-coded out of 16,777,216 possible
INSTEON Links: 417 out of 16,777,216 possible
INSTEON Powerline Frequency: 131.65 KHz
INSTEON Minimum Transmit Level: 3.2 Vpp into 5 Ohms
INSTEON Minimum Receive Level: 10 mVpp nominal
INSTEON Messages Repeated: Yes
Mechanical
Operating Conditions: Indoors, 32 to 122°F, up to 85% relative humidity
Dimensions: 4.1" H x 1.73" W x 1.73" D
Weight: 3.6 oz.
Electrical
Supply Voltage: 120 Volts AC +/- 10%, 60 Hertz, single phase
Surge Protection: MOV rated for 150 Volts
Neutral Wire: Required
Power Wire Leads: 6", 16 AWG, stranded, 600V, 105°C insulation, ends stripped and tinned, LINE (black), NEUTRAL (white)
Ground Lead: 6", 18 AWG, stranded, bare copper
Maximum Load:

480 Watts (for incandescent loads)

Maximum Amps:

15 Amps (for resistive loads)

Minimum Load: No minimum load required
Certification: Safety tested for use in USA and Canada (ETL #3017581)
X10 Features
X10 Primary Address: 1 optional (comes unassigned)
X10 Scene Addresses: 255 possible
X10 Status Response: Supported
X10 Powerline Frequency: 121 KHz
X10 Minimum Transmit Level: 3.2 Vpp into 5 Ohms
X10 Minimum Receive Level: 20 mVpp nominal
X10 Messages Repeated: No

* Clean in-wall design blends in anywhere in your home

* Manual ON/OFF button for added convenience

* Built-in relay allows you to connect devices of any type

* Top outlet is INSTEON controlled; bottom is always on

* Available in white, ivory, almond and black

right html

For Weekly Promotions and Product Information


-

-























Click to Expand
What is X10?
Quite simply X10 is a communication protocol that allows other X10 devices to communicate over the electrical wiring (power line) of your home or business. The great thing about X10...click here to read more.
What is Z-Wave?
Z-Wave is a next-generation wireless ecosystem that lets all your home electronics talk to each other, and to you, via remote control. It uses simple, reliable...click here to read more.
What is X10 PRO?
If you ask a professional home automation installation what they put in people's homes when it comes to X10 than the answer is always the same X10 Pro products. So you may ask ....click here to read more.