INSTEON ApplianceLinc (3-Pin) — Our Most Advanced Remote-Controllable Plug-In On/Off Switch

Fill your entire home with personalized mood lighting for any occasion. The INSTEON ApplianceLinc (3-Pin) is a full-featured plug-in lamp dimmer that can be remotely controlled by a ControLinc tabletop controller, KeypadLinc , or any other INSTEON controller . This simple-to-use plug-in dimmer has advanced features suchl as local control, so you can still use the appliance's built-in switch to turn device on and off.

The ApplianceLinc 3-Pin is made to be plugged into a 3-pin grounded outlet. This on/off module controls all standard appliances like fans, fluorescent lights, and many other non-dimmable devices up to 15 amps and incandescent lights up to 480 watts. If you need to control a dimmable lamp, try the INSTEON LampLinc Dimmer (2-Pin) , or the grounded INSTEON LampLinc Dimmer (3-Pin), which allow on/off and brightness control.

Never come home to a dark house again: Install INSTEON HouseLinc Desktop Software on your computer to schedule any ApplianceLinc or any other INSTEON-compatible device to turn on or off at any specific time or even at sunrise and sunset. The ApplianceLinc can control up to a 300-watt load.

Easy To Install
The ApplianceLinc is easy to plug-in and set up and yet so affordable, you'll want to add ApplianceLinc (3-Pin)s to all of your lamps. Just unplug the lamp, plug the lamp into the bottom outlet of the dimmer, and plug in the dimmer where the lamp was plugged in. Link the dimmer to an INSTEON controller using the Plug & Tap programming method, and you'll be able to turn the lamp on and off, brighten and dim. If this is your first INSTEON installation, the best way to ensure you get everything needed to provide the most reliable communication among devices is to buy the complete INSTEON Lamp Scene Lighting Starter Kit , which includes everything required to set up your INSTEON network, including two 3-Pin ApplianceLinc (3-Pin)s , a pair of INSTEON Access Points (& Wireless Phase Couplers) to ensure INSTEON network reliability, and the INSTEON ControLinc Tabletop Controller . Learn more about INSTEON here.

Pass-Through Outlet
In addition to the INSTEON-controlled outlet, ApplianceLinc offers a non-controlled outlet on the front face, so you won't have to unplug your lamp module just to find a place to plug in the vacuum cleaner.

Status LED
Get a visual indication when your ApplianceLinc is sending or receiving INSTEON or X10 signals. The Status LED is also used for setup programming.

Create Multi-Way Circuits
The ApplianceLinc (3-Pin) allows you to customize your lighting setup no matter how your house is wired. It's simple to create a 3-, 4-, or 5-way controlled lamp. First plug the lamp you want to include in the circuit into the dimmer, then plug the ApplianceLinc into an open outlet. Link the dimmer to all the INSTEON-compatible wall switches and INSTEON ControLinc Tabletop Controllers that you want to control the dimmer for a flexible, fully functional multi-way controlled lamp.

Scene Lighting
Scenes allow you to control multiple lights, rooms or even the whole home with a single command. Because the ApplianceLinc can be a member of more than 400 scenes (i.e. "Movie Time," "Party," "Romance," etc.), you'll be able to launch various lighting scenarios with a single button press on an INSTEON controller. These are elegant features usually found only in systems costing tens of thousands of dollars and requiring extensive rewiring of your home. All member lights can ramp to your independently desired brightness levels at your chosen ramp rate(s), so one set of lights can dim slowly while another set turns off instantly, all controlled with one command from one button. If you want to control multiple scenes from one controller, try the INSTEON KeypadLinc Dimmer .

Compatibility
The ApplianceLinc (3-Pin) is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. X10 ready means that it can respond to X10 commands from an X10 controller. Please note that INSTEON devices repeat INSTEON signals but not X10.

Non-Volatile Memory
All ApplianceLinc (3-Pin) settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, the ApplianceLinc (3-Pin)'s lamp will return to its last brightness level when power is restored.

Certifications and Warranty
All INSTEON ApplianceLinc products are safety approved. The factory for SmartLabs Design Products is ISO9002 certified. In order to meet the ISO 9002 standards, the entire factory underwent rigorous inspections of procedures and policies before being certified. The certification received was based on its dedication to high-quality management systems and strict adherence of quality control systems and guidelines. Because of this, Smarthome stands behind the entire INSTEON ApplianceLinc line of products with a full 2-year warranty.

* Control a non-dimmable fluorescent light or appliance, turning it on and off remotely

* Super-quiet ON/OFF operation

* Easy-to-install relay uses INSTEON (patent pending) technology for superior performance and reliability

* INSTEON technology received the Consumer Electronic Show (CES) Innovations 2005 Design and Engineering Award