Control Any INSTEON or X10 Device Remotely With This Tabletop Controller

If this is your first INSTEON installation, the best way to get everything needed to start your lighting automation is with one of these three starter kits: INSTEON Lamp Scene Lighting Starter Kit , which includes two INSTEON LampLinc Dimmer (3-Pin) plug-in modules, two INSTEON Access Points (& Wireless Phase Couplers) , and one INSTEON ControLinc Tabletop Controller. INSTEON Wire-in Dimmer Scene Lighting Starter Kit , which includes two INSTEON SwitchLinc Dimmers , two INSTEON SignaLinc RF Signal Extenders , and one INSTEON ControLinc Tabletop Controller. INSTEON Keypad Dimmer Scene Lighting Starter Kit , which includes one INSTEON KeypadLinc Dimmer , two INSTEON SignaLinc RF Signal Extenders , and two INSTEON SwitchLinc Dimmers . These starter kits include everything required to set up your INSTEON network. Learn more about INSTEON here.

INSTEON ControLinc Tabletop Controller
The INSTEON ControLinc Tabletop Controller is an easy-to-use and quick-to-set-up plug-in tabletop controller. You can control up to five individual INSTEON-compatible devices or sets of devices with the tabletop ControLinc, which has a total of 14 buttons. Five sets of buttons turn your devices on and off. The "All On" and "All Off" buttons can control all devices linked to any of the five on/off buttons. "Bright" and "Dim" will adjust the brightness level of the any linked INSTEON-compatible wall dimmers or plug-in lamp dimmers . You can even put a ControLinc on your bedside table to control downstairs lamps if you hear a noise in the middle of the night.

Easy Setup
The ControLinc uses a simple "Plug-N-Tap" process to link to other INSTEON devices. Put the ControLinc in setup mode by pressing any of the five ON buttons for 10 seconds, and then press the button on the module you would like to control. That's all it takes to link the ControLinc to any INSTEON module!

Scene Capable
Each of the five ON/OFF buttons on the ControLinc can be set up to control one INSTEON module or multiple modules in a scene.

Works with Legacy X10 Products
Each of the five ON/OFF buttons on the ControLinc can be assigned an X10 address. This enables the ControLinc to bridge your INSTEON network with your legacy X10 network. The ControLinc ON/OFF buttons can be assigned any X10 address and do not have to be assigned sequentially. This makes the ControLinc an excellent replacement for your existing X10 mini-controller.

Certifications and Warranty
All INSTEON ControLinc products are safety approved. The factory for SmartLabs Design Products is ISO9002 certified. In order to meet the ISO 9002 standards, the entire factory underwent rigorous inspections of procedures and policies before being certified. The certification received was based on its dedication to high-quality management systems and strict adherence of quality-control systems and guidelines. Because of this, Smarthome stands behind the entire INSTEON ControLinc line of products with a full 2-year warranty.

Product Number	2430, INSTEON ControLinc Tabletop Controller
UPC:	891114000181
Warranty	2 years
Whats Included	INSTEON ControLinc V2, Quick-start guide
Downloads:	Product Manual   Quick Start Guide   Custom Label Template   Custom Label Template                           Remotely Control Christmas Lights

BUY IT NOW

* Five-channel easy-to-use tabletop controller

* Install and set up in less than 5 minutes

* Works with legacy X10 products

* INSTEON technology received the Consumer Electronic Show (CES) Innovations 2005 Design and Engineering Award